At the first picture is shown my standard measuring place. Tester with Silentator is at the second picture. At the others pictures is shown where exactly are temperature sensors placed. I did all measurements with native not myself grinded base surface   Temperature tests results of this cooler were very good. It is needless to say because cooler has assumptions lent form NOCTUA and its excellent thermodynamical design too. Gaps between the the cooling fins are 3 mm. Thanks to these gaps the turbulences of air flow are minimised and cooler has better flow together with efficiency.



I measured cooler also after i did grinding of base plate and I find that this was not needed. Base plate's surface was originally ragged but flatness was good. I did another temperature measurements wit the power of 155W and another thermal pastes. First was OEM, 2nd was Primecooler PC-100S and the 3rd was Shin Etsu thermal paste. There was not big differences between results.

   



I must to mention that after all tests and grinding of base plate I tried to overclock my home PC. As thermal paste I used Coolaboratory liquid pro and I used it for CPU and chipset too. Form photos is clear that I used it maybe too much. I achieved nice 3255MHz, that is according to native 2100MHz very nice and it is good direct advertising for tested Coolink Silentator.